Home Mechanical Mechanical Seal
Mechanical Seal
Mechanical Seals

http://www.latty.com/

 

CARTseal® B 14610

Revolutionary, CARTseal® B 14610 leaves the competition behind with a mix of concepts linking ingenuity and technology. Primarily, CARTseal® B 14610 is designed for the end user as testifies its exceptional modularity allowing full compliance with all types of environments and a reduced operating cost. Secondly, CARTseal® B 14610 is a paramount of technology targeted at performance, ease of use and safety: the patented drive system, unique working length, self-turning setting clamps partially illustrate this affirmation. CARTseal® B 14610 is up to NF EN 12756/DIN 24960.

CARTseal® B 14810

Revolutionary, CARTseal B 14810 leaves the competition behind with a mix a concepts linking ingenuity and technology. Primarily, CARTseal B 14810 is designed for the end user as testifies its exceptional modularity allowing a full compliance with all types of environments and a reduced operating cost. Secondly, CARTseal B 14810 is a paramount of technology targeted at performance, ease of use and safety: the patented drive system, unique working length, self-turning setting clamps partially illustrate this affirmation. CARTseal B 14810 is up to NF EN 12756/DIN 24960.

   CARTseal® B 14610 Q

Upper version of CARTseal® B 14610, this model includes an auxiliary seal used as a quench feature. Its unique fibrous material makes it water absorbent, thus capable of supporting some water shortage. Thanks to its quench device, CARTseal® B 14610 Q increases seal life expectancy on crystallizing, solidifying or vaporizing products.

  CARTseal® B 14810 Q

Upper version of CARTseal B 14810, this model includes an auxiliary seal used as a quench feature. Its unique fibrous material makes it water absorbent, thus capable of supporting some water shortage. Thanks to its quench device, CARTseal B 14810 Q increases seal life expectancy on crystallizing, solidifying or vaporizing products.

 

 CARTseal® B 14610 PP

 Designed specially for applications where flush circulation is useless or prohibited, CARTseal® B 14610 PP offers all the internal proven benefits of CARTseal® B 14610 on a thinner flange configuration targeted at cost reduction.

 

 CARTseal® B 14810 PP

Designed specially for applications where flush circulation is useless or prohibited, CARTseal B 14810 PP offers all the internal proven benefits of LATTYseal B 14810 on a thinner flange configuration targeted at cost reduction.

 

 CARTseal® B 14610 PPQ

Designed specially for applications where flush circulation is useless or prohibited, CARTseal® B 14610 PPQ offers all the internal proven benefits of CARTseal® B 14610 Q on a thinner flange configuration. Absence of medium crystallization underneath the faces, heating or cooling of the seal are now effectively realized.

 

 CARTseal® B 14810 PPQ

Designed specially for applications where flush circulation is useless or prohibited, CARTseal B 14810 PPQ offers all the internal proven benefits of CARTseal B 14810 Q on a thinner flange configuration. Absence of medium crystallization underneath the faces, heating or cooling of the seal are now effectively realized.

 

CARTseal® B 14810 DB

CARTseal® B 14810 DB is today the ultimately sophisticated version of CARTseal® B 14810. Capable of operating as a pressureless tandem seal or as a pressured double seal, CARTseal® B 14810 DB guarantees, by inventory shrinkage, a TCO reduction, while maximumsealing flexibility and reliability are given by one product that fits many applications.

 

 CARTseal® B 14810 DBSA

The GM CARTseal® B 14810 DBSA is a variant of our dual versions designed for applications in extremely harsh and corrosive environments. The “wet” parts of the seal are made of exotic materials or with optional coatings. The operating characteristics are identical to those of the standard versions.

 

 LATTY®seal U 1000

Streamlined to an extreme, LATTY®seal U 1000 is the mechanical seal of choice for a wide variety of NF EN 12756/ DIN 24960 equipment. Ruggedness and simplicity are all factors of longevity and installation ease. Its conical spring concept makes it dependent on direction of rotation. Chemical, food processing

 

 LATTY®seal U 1110

Conceptually similar to LATTY®seal U 1000 but fitted with a carbon face, LATTY®seal U 1110 fulfills a wide spectrum of applications on commonly used NF EN 12756/DIN 24960 equipment. Its conical spring concept makes it dependent on direction of rotation. Chemical, food processing and bio-engineering industries, water circulation applications. All corrosive, non-abrasive and non-clogging fluids.

   LATTY®seal U 1212

Conceptually similar to LATTY®seal U 1000 but fitted with silicon carbide faces, LATTY®seal U 1212 is particularly
suitable for the pumping of light slurry fluids onwidely used NF EN 12756/DIN 24960 pumps. Its conical spring concept makes it dependent on direction of rotation. Chemical, food processing and bio-engineering industries, waste water and sewageapplications. All slightly corrosive, abrasive and non-clogging fluids.

 

 LATTY®seal U 6810

Targeted at the immense field of process pumps built to NF EN 12756/DIN 24960, LATTY®seal U 6810 offers an instantaneous interchangeability of the rotating face permitting multiple use and cost reduction. Wide spectrum of rotating and stationary faces. Chemical and petrochemical, food processing and bio-engineering industries, feed water applications, etc. All corrosive, abrasive and slightly clogging fluids.

 
 LATTY®seal B 6810
 
Aimed at high-pressure process pumps, built to NF EN 12756/DIN 24960, LATTY®seal B 6810 is the compensated version of the U6810. Chemical and petrochemical, food processing and bio-engineering industries, feed water applications, etc. All corrosive, abrasive and slightly clogging fluids.

 

 LATTY®seal B 23110

Standard balanced mechanical seal with a single spring washer and pentagonal drive. The areas of applications are huge due to the protection design for the spring washer: pumps conveying slurries for the sugar industry, paper industry, extracting industry, for heavy industries, all simple assemblies possible (cartridge, tandem, quench, etc.).

 

 LATTY®seal B 23210

Standard balanced mechanical seal with a single spring washer and pentagonal drive. The areas of applications are huge due to the protection design for the spring washer: pumps conveying slurries for the sugar industry, paper industry, extracting industry, for heavy industries, all simple assemblies possible (cartridge, tandem, quench, etc.)

 LATTY®seal B 23212

Standard balanced mechanical seal with a single spring washer and pentagonal drive. The areas of applications are huge due to the protection design for the spring washer:pumps conveying slurries for the sugar industry, paper industry, extracting industry, for heavy industries, all simple assemblies possible (cartridge, tandem, quench, etc.).

 

 CARTseal® B 23612

Cartridge version of the LATTY®seal B 23 pentagonal drive, protected spring, mechanical seal.

 

 CARTseal® B 23612 Q

Cartridge version of the LATTY®seal B 23 pentagonal drive, protected spring, mechanical seal. With its quench CARTseal® B 23610 Q improves the life time of the mechanical seal used with crystallising, solidifying or vapouring products.

 

 LATTY®seal B 10712

Solely designed for the sealing of highly abrasive or viscous media, LATTY®seal B 10712 is the forgivingseal that heavy industry requires in terms of endurance and reliability. Its ability to receive abuses is unsurpassed. Pulp and paper mills, sugar, waste water applications. All corrosive, abrasive and highly clogging fluids.

 

 LATTY®seal B 16670

Since no metal part is in contact with the media, the externally mounted LATTY®seal B 16670 withstands highly corrosive media. Due to a lateral tightening screw and an engraved reference line, installation is quick and simple. Chemical, food industry, reactors applications. All highly corrosive, abrasive and slightly clogging fluids.

 

 LATTY®seal B 17110

Using a State-of-the-Art welded bellows technology, LATTY®seal B 17110 provides no hang-up or shaft fretting due to the absence of any semi-dynamic O-rings. The centrifugal force and natural bellows respiration make LATTY®seal B 17110 a self cleaning seal. High rotation speeds are achievable. Chemical, petrochemical, pulp and paper applications.
All corrosive, slightly abrasive and clogging fluids.

 

 LATTY®seal B 17210

Using a State-of-the-Art welded bellows technology, LATTY®seal B 17210 provides no hang-up or shaft fretting due
to the absence of any semi-dynamic O-rings. The centrifugal force and natural bellows respiration make LATTY®seal
B 17210 a self cleaning seal. High rotation speeds are achievable.
Chemical, petrochemical, pulp and paper applications.
All corrosive, slightly abrasive and clogging fluids.

   LATTY®seal B 18212

LATTY®seal B 18212, designed in compliance with NF EN 12756/DIN 24960 is suitable for use in severe
application cases due to its strength and reliability. The use of an overdimensioned cylindrical spring and the
friction faces made of silicium carbide U3 (Q2) or, for the most difficult cases of tungsten carbide with nickel
binder U2 (U2), make it a complete balanced mechanical seal that has proven its efficiency within extremely
severe atmospheres. Iron and steel industry, sugar industry, paper industry, treatment of waste water, heavy industry, etc. Any corrosive, abrasive and clogging fluid.

   
   
 


Copyright © 2018. TWA. Design by Dewanstudio.com